Gaskets

Seals in the car: recognise defects early and replace them easily

Oil stains under the car, loss of coolant or unpleasant odours in the interior quickly show when seals in the car no longer seal properly. This can permanently damage the engine, transmission or engine cooling system. At ecanis, you will find a large selection of suitable seals and spare parts to help you fix leaks - from small seals to complete sets in brand quality, for example from HELLA or VALEO.

How seals work in the vehicle and where they are used

High-quality seals in the vehicle ensure that oil, coolant, fuel and air stay exactly where they belong. This reliably maintains the functionality of the engine, transmission and engine cooling. Depending on the application, different types of seals are used, such as Engine Cooler Gaskets, valve cover gaskets or O-rings, which must fit exactly during assembly. It is particularly important to select seals that match the respective component to ensure a stable seal, especially in the event of severe temperature fluctuations or high mileage.

More driving comfort when everything is tight

If all relevant seals in the car are intact, the interior remains free of unpleasant odours, there are no stains in the driveway and the engine runs more smoothly. If seals become porous or tear, typical damage such as dripping under the vehicle, permanent loss of fluid or hissing noises quickly becomes apparent. With new, suitable seals, you can extend the service life of many components and ensure a safe and clean driving experience in everyday life.

Repair or replace seals directly?

When it may be worth repairing the seals

In some cases, it is sufficient to repair minor leaks in easily accessible areas. This can make sense if the affected sealing surfaces are still in good condition and the seal itself is only slightly damaged or dirty. In this case, careful cleaning, a little sealing compound or a single ring is often enough to reliably seal the area again. It is important to prepare the sealing surfaces thoroughly and then keep an eye on the repair area.

As soon as seals have visible cracks, have become hard or leaks occur again and again, you should consistently replace them instead of just repairing them. This applies in particular to older components with high mileage or areas subject to heavy loads such as the engine, transmission and engine cooling system. New seals of the right design ensure that the affected components seal reliably again and prevent expensive consequential damage. Complete gasket sets, for example from HELLA or VALEO, can also be useful if several sealing points are opened anyway.

Find and order suitable seals online

Using the intelligent car spare parts search in the shop, simply select your vehicle by HSN and TSN and you will receive an overview of suitable seals for your model. This allows you to quickly find the right parts for the engine, transmission or engine cooling system and, if necessary, order the right accessories such as sealing compounds or O-rings. The structured presentation helps you to avoid incorrect orders and select exactly the right seals for your vehicle and your project.

Your advantages with ecanis

• Wide range of seals and matching accessories for many common vehicle models
.
• Selection of branded products in high-quality design for long-lasting seals
• Convenient car spare parts search with HSN and TSN for precise parts selection.
• Clear online ordering with clear product information and images.
• Service-orientated support for selection, areas of application and fitting instructions.

FAQ

How do I find the right seals for my car?

To find suitable seals, enter the HSN and TSN from your vehicle registration document in the car spare parts search in the shop. You will then only be shown the compatible gasket parts that fit your vehicle. This allows you to filter specifically for engine, transmission or Engine Cooler Gaskets and narrow down the selection step by step.

How do I recognise that a Seal should be replaced?

Indications of a defective Seal are oil or coolant stains, a gradual loss of operating fluids or unusual odours in the interior. Visible cracks, hardening or swollen material on the seal are also clear signs that it needs to be replaced. If a seal has leaked several times, you should replace it completely.

What should I consider when buying new seals?

Make sure that the Seal exactly matches your vehicle model and the respective component. Check the vehicle data, manufacturer approvals and technical specifications in the product text. It also makes sense to replace all seals that have to be loosened anyway when opening an assembly part to avoid having to remove it again.

Read More